HP Envy 6055 Won’t Connect to WiFi – Troubleshooting Guide

Connect hp envy 6055 to wifi

The HP Envy 6055 is a versatile all-in-one printer designed for wireless printing, making it convenient for home and office use. However, connectivity issues can arise, preventing the printer from connecting to WiFi. If your not connect hp envy 6055 to wifi, it can be frustrating, especially when you need to print important documents.

This guide will explore the possible reasons for WiFi connection failures and provide step-by-step troubleshooting methods to resolve the issue.

Common Reasons Why HP Envy 6055 Won’t Connect to WiFi

Before diving into troubleshooting, it is essential to understand why the HP Envy 6055 might be struggling to connect to WiFi. Here are some common reasons:

1. Incorrect WiFi Credentials – The printer cannot connect if the wrong WiFi password is entered.
2. Router Issues – Network congestion, router firmware problems, or incorrect router settings can interfere with the connection.
3. Weak WiFi Signal – If the printer is too far from the router, it may have trouble maintaining a stable connection.
4. Network Interference – Nearby electronic devices like microwaves, Bluetooth devices, or thick walls can disrupt WiFi signals.
5. Printer Software or Firmware Issues – Outdated firmware can cause connectivity problems.
6. Network Configuration Errors – If the router settings are incompatible with the printer, a connection failure may occur.
7. IP Address Conflicts – If another device on the network has the same IP address as the printer, it can cause connectivity issues.

Now, let’s go through various troubleshooting methods to fix these issues.

Read More: hp deskjet 4100e printer setup

Method 1: Restart Your Printer, Router, and Computer

A simple restart can resolve temporary glitches. Follow these steps:

1. Turn off the HP Envy 6055 printer and unplug it from the power source.
2. Restart your router by unplugging it for 30 seconds and then plugging it back in.
3. Restart your computer or mobile device to refresh the network connection.
4. Turn the printer back on and check if it connects to WiFi.

If the issue persists, proceed to the next method.

Method 2: Check Your WiFi Network and Credentials

Ensure that your WiFi network is active and functioning properly.

1. Verify that your router is broadcasting the correct WiFi network (SSID).
2. Double-check the WiFi password before entering it into the printer.
3. Try connecting another device (such as a smartphone or laptop) to the same WiFi network to see if it works.
4. If your network has special characters in the password, try changing it to a simpler one and reconnecting.

Method 3: Move the Printer Closer to the Router

If your printer is too far from the WiFi router, the signal may be weak or unstable.

1. Place the printer within 5-10 feet of the router and try connecting again.
2. Avoid placing the printer near walls, metal objects, or electronic devices that might interfere with the signal.

Method 4: Reset the Printer’s Network Settings

Resetting the printer’s network settings can help clear any connection issues.

1. Press and hold the WiFi button and the Cancel button (X) on the printer for 5 seconds.
2. Wait for the WiFi light to start blinking, indicating that the network settings have been reset.
3. Reconnect the printer to WiFi using the HP Smart App or manual setup.

Method 5: Reconnect HP Envy 6055 to WiFi Using HP Smart App

The HP Smart App provides an easy way to set up the printer’s WiFi connection.

1. Download and install the HP Smart App on your computer or mobile device.
   • Windows/macOS: HP Official Website
   • iOS: Apple App Store
   • Android: Google Play Store
2. Open the HP Smart App and click on “Add Printer”.
3. Select HP Envy 6055 from the available printers.
4. Choose your WiFi network and enter the password.
5. Wait for the WiFi light on the printer to turn solid, confirming the connection.

Method 6: Connect Using WPS (Wi-Fi Protected Setup)

If your router has a WPS button, you can use this method to connect your printer.

1. Press and hold the WiFi button (📶) on the printer for five seconds until the light starts blinking.
2. Press the WPS button on your router within two minutes.
3. The printer will attempt to connect to the network. The WiFi light will stop blinking when the connection is successful.

Method 7: Manually Connect the Printer to WiFi

If automatic methods don’t work, try setting up the WiFi manually.

1. Reset network settings on the printer (hold the WiFi button + Cancel button for five seconds).
2. Open your computer’s WiFi settings and connect to the printer’s temporary network (HP-Setup-XX-ENVY-6055).
3. Open a browser and go to 192.168.223.1 (the printer’s configuration page).
4. Click Wireless Setup Wizard and select your home WiFi network.
5. Enter the WiFi password and click Apply.

Method 8: Check Router Settings

Some router settings may prevent the printer from connecting.

1. Check if MAC Address Filtering is enabled – If so, add the printer’s MAC address to the allowed list.
2. Disable VPN or Proxy Settings – These can interfere with the printer’s network connection.
3. Ensure the 2.4 GHz Band is Enabled – The HP Envy 6055 only supports 2.4 GHz WiFi, not 5 GHz.
4. Restart the router after making any changes.

Method 9: Update Printer Firmware and Drivers

Outdated firmware or drivers can cause connectivity issues.

1. Visit the HP Support Website and search for HP Envy 6055 drivers.
2. Download and install any available firmware updates.
3. Restart the printer and try connecting to WiFi again.

Method 10: Assign a Static IP Address to the Printer

Sometimes, an IP conflict can prevent the printer from staying connected.

1. Print a Network Configuration Page:
   • Press and hold the Information button (i) until the page prints.
2. Look for the Current IP Address of the printer.
3. Open your router’s admin panel and assign the printer a static IP address.
4. Restart both the router and printer, then check if the connection is stable.

Conclusion

If your HP Envy 6055 won’t connect to WiFi, the issue can be caused by various factors such as incorrect credentials, weak signals, or outdated firmware. By following the step-by-step troubleshooting methods in this guide, you can successfully restore the connection and continue printing wirelessly.

If none of these solutions work, consider contacting HP Support for further assistance.